home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-17
/
4mmos2.zip
/
README.TXT
< prev
Wrap
Text File
|
1992-10-16
|
2KB
|
43 lines
This file contains information on how to install Sytos Plus
OS/2 and DOS device drivers for systems using the
IBM 4mm DAT Device. You should have received
copies of the drivers either on diskette from Sytron or from
Sytron's BBS.
Refer to the README file on your Sytos Plus Installation
Diskettes for possible additional about your particular
backup device.
To install the device drivers, refer to the appropriate steps.
A. Installing the DOS Device Driver
1. Copy the file IBG_DATI.DRV into your \SYPLUS\SYFILES
subdirectory on the drive where you loaded Sytos Plus.
2. Start Sytos Plus.
3. At the "Utilities: Backup Device Setup" window select
"Add New Device."
4. A list of available drivers appears. Highlight and select the
correct driver for your system.
5. When you finish, choose OK or press F2.
6. Reboot your system if CONFIG.SYS has been modified.
B. Installing the OS/2 Device Driver
1. Copy the following three files into your \SYPLUS\SYFILES
subdirectory on the drive where you loaded Sytos Plus.
IBG_DATI.DRV
IBG_DATI.SYS
IBG_DATI.TXT
2. Start Sytos Plus.
3. At the "Utilities: Backup Device Setup" window select
"Add New Device."
4. A list of available drivers appears. Highlight and select the
correct driver for your system.
5. When you finish, choose OK or press F2.
6. Reboot your system if CONFIG.SYS has been modified.
--- END OF README ---